Máy sắc ký khí GC hệ chuyên dụng theo tiêu chuẩn (Standard GC Analyzer Solution)

Máy sắc ký khí GC hệ chuyên dụng theo tiêu chuẩn (Standard GC Analyzer Solution)
Hãng: SCION Instrument – Hà Lan

1. Tổng hợp Máy sắc ký khí GC hệ chuyên dụng theo tiêu chuẩn (Standard GC Analyzer Solution)

(Summary of Standard GC Analyzer Solution)

# Phương pháp/ Test Method Mô tả/ Scope
1 ASTM D7593 Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography
2 ASTM D7922 Determination of Glycol for In-Service Engine Oils by Gas Chromatography
3 ASTM D4815 Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
4 ASTM D5580 Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
5 ASTM D4815/5580 Two ASTM methods in one hardware
6 ASTM D3606-A/B Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

Procedure A: uses capillary column gas chromatography

Procedure B: uses packed gas chromatography columns

7 ASTM D4815/5580/3606-A Three methods in one system
8 ASTM D4815/5580/3606-B Three methods in one system
9 ASTM D6228 Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
10 ASTM D8071-17 Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

The PIONA analyzer acc D8071 is based on a relative short DHA column, and VUV detection. It uses Retention time combined with strong spectral deconvolution software with specific editable application libraries to qualify and quantify constituents in gasolines and gasoline blend streams.

11 ASTM D8267 Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
12 ASTM D7833 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography
13 ASTM D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography
14 ASTM D4815+GSV Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

·       With additional GSV

15 ASTM D5623/GPA2199 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
16 ASTM D5441 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
17 ASTM D2593/D4424 D2593 – Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D4424 – Standard Test Method for Butylene Analysis by Gas Chromatography

18 UOP960/UOP603 UOP 960 – Determination of Trace Oxygenated Hydrocarbons in Gaseous, LPG and Liquid Hydrocarbon Streams by GC

UOP 603 – Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by Gas Chromatography

19 ASTM D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
20 ASTM D8098&UOP1024-18 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
21 ASTM D6730+lowox Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
22 ASTM D3612-B Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography with stripper column
23 ASTM D7423&D4815 D7423 – Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

D4815 – Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

24 ASTM D6352/D7213/D5442 D6352 – Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

D7213 – Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D5442 – Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

25 ASTM D5507-99 Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
26 ASTM D2908&D3695 D2908 – Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography

D3695 – Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography

27 IFP 0911  
28 ASTM D3612-C Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography with Head Space sampling
29 ASTM D6730/D5442 D6730 – Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D5442 – Analysis of Petroleum Waxes by Gas Chromatography

30 ASTM D6730/D5442, hardware only D6730 – Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D5442 – Analysis of Petroleum Waxes by Gas Chromatography

31 ASTM D2163 Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
32 ASTM D2163 LIV ONLY Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography
33 ASTM D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography
34 ASTM D5504&D5623&D6228 D5504 – Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

D5623 – Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

D6228 – Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

35 ASTM D2504&D2505&D2712 D2504 – Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

D2505 – Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

D2712 – Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography

36 ASTM D2887&D5442 D2887 – Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D5442 – Analysis of Petroleum Waxes by Gas Chromatography

37 ASTM D6352 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography
38 ASTM D6730&D5134&D6733 D6730 – Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D5134 – Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

D6733 – Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

39 ASTM D2712 D2712 – Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
40 ASTM D6730&D2887&D5442 D6730 – Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D2887 – Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D5442 – Analysis of Petroleum Waxes by Gas Chromatography

41 ASTM D7423 Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
42 ASTM D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography
43 ASTM D7096 ASTM D-7096. The determination of the boiling range distribution of gasoline and gasoline components. This test method is applicable to petroleum products and fractions with a final boiling point of 500°F (260°C) or lower. Note that ASTM method D3710has been withdrawn and replaced by ASTM D-7096. If the request is for ASTM D3710, the copnfiguration for ASTM D7096 needs to be offered!
44 ASTM D2887, ISO 3924 & IP 406 ASTM D 2887. The determination of the boiling range distribution of petroleum products. It is applicable to petroleum products and fractions having a final boiling point of 538°C (1000°F) i.e. carbon number C44 or lower at atmospheric pressure as measured by this test method. The method is limited to samples having a boiling range greater than 55°C (100°F).

The method is not for  gasolines. Use D-7096.

45 ASTM D2887 Extended, ASTM D7213 & DIN 51435 ASTM D-2887 Extended, ASTM D-7213  & DIN 51435. The determination of the boiling range distribution of petroleum products especially base oils for production of lubricants. It is applicable to petroleum products and fractions having a final boiling point of 615°C (1140°F) i.e. carbon number C60 or lower at atmospheric pressure as measured by this test method.

Note: ASTM D-7213 is the official method of ASTM D 2887 extended.

46 ASTM D6352, ASTM D7169, IP 480, IP 507 and IP 545 ASTM D 6352. The determination of the boiling range distribution of petroleum distillate fractions. The test method is applicable to petroleum distillate fractions having an initial boiling point greater than 174°C (345°F) and a final boiling point of less than 700°C (1292°F) (C10-C90). The method is not applicable for petroleum products containing low molecular weight components (for example naphthas, reformates, gasolines, crude oils) or residues. See Test Method D-7096, D-2887 or D-5307 for possible applicability to analysis of these types of materials.
47 ASTM D6729 ASTM D-6729. Determination of individual hydrocarbon components of spark-ignition engine fuels and their mixtures containing oxygenate blends (MTBE, ETBE, ethanol, and so forth) with boiling ranges up to 225°C.

Note: ASTM D-6729 replaces and has the identical configuration as the

withdrawn method ASTM D-6623. ASTM D6730 and D-6733 replace also ASTM D-6623 but are configured differently.

48 ASTM D6730 ASTM D6730. Determination of individual hydrocarbon components of spark-ignition engine fuels and their mixtures containing oxygenate blends (MTBE, ETBE, ethanol, and so forth) with boiling ranges up to 225°C.
49 ASTM D6733 ASTM D6733. Determination of individual hydrocarbon components of spark-ignition engine fuels with boiling ranges up to 225°C.  Component concentrations are determined in the range from 0.10 to 15 mass %.
50 ASTM D5134 ASTM D5134. Determination of hydrocarbon components of petroleum naphthas. Components eluting after n-nonane (bp 150.8°C) are determined as a single group. The method is applicable to olefin-free (<2 % olefins by liquid volume) liquid hydrocarbon mixtures Includes virgin naphthas.
51 ASTM D7900, IP 344 or ASTM D7169 front-end IP 344. Determination of individual hydrocarbons in stabilized crude oil up to the pentanes. The Carbon number C6 up to C12 are reported by functional group (Paraffins, iso-paraffins, naphthenes and aromatics.
52 ASTM D3612-A Based on a 456-GC with TCD/FID in series, this system is configured to conform to the ASTM D-3612 procedure A. Gas extraction hardware is not included.  The fully automated GC includes: Dual Detectors (TCD/FID), methanizer for converting CO, CO2 to CH4 for detection by FID, dual valves (10-port for sample injection and 8-port for column selection and backflush). Provides low concentration detection of H2, O2, N2, CO, CO2, CH4, C2H6, C2H4, C2H2.  Isothermal operation provides analysis time of 8 minutes, with no delay between samples. Electronic flow control is implemented.
53 ASTM UOP539 Refinery Gas Analysis by Gas Chromatography
54 ASTM D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography
55 ASTM D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number non-aromatic
56 ASTM D2505/D6159-17 D2505: Determination of carbon dioxide, methane, ethane, acetylene, and other hydrocarbons in high-purity ethylene

D6159-17: Determination of Hydrocarbon impurity (methane, ethane, propane, propene, acetylene, iso-butane, propadiene, butane, trans-2-butene, butene-1, isobutene, cis-2-butene, methyl acetylene and 1,3-butadiene) in high-purity ethylene

57 ASTM D5504-12 Determination of Sulphur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
58 ASTM D5303-19 Determination of Trace Carbonyl Sulphide in Propylene by Gas Chromatography
59 ASTM D5623-19 can be put for sulphur species in liquid fuels with adding one additional liquid injection port.
60 ASTM D8174 Determination of Oxygenates including methanol in Ethylene
61 ASTM E 2409-13 Determination of Mono ethylene glycol for process samples

Determination of Di ethylene glycol, tri ethylene glycol, and tetra ethylene glycol for process samples

Determination of Glycols product specification

62 ASTM D4864 Determination of traces of Methanol in

propylene using ASTM D 4864

63 UOP551 UOP-551 SCOPE

This method is for determining benzene, individual hexanes and lower boiling hydrocarbons in olefinfree

gasolines having a final boiling point of 260°C or lower. Results may be reported in mass-% or liquid

volume (LV-%). The lower limit of detection for any single component is 0.05 mass-%.

64 ASTM D1945&D7833 D1945: Standard Test Method for Analysis of Natural Gas by Gas Chromatography

D7833: Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography

65 ASTM D5623 Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
66 GPA 2286 GPA 2286: Method for the Extended Analysis for Natural Gas and Similar Gaseous Mixtures by Temperature Program Gas Chromatography
67 ASTM D6730&D7169&D7900  
68 ASTM D5623&D7423  
69 UOP603 Trace CO and CO2 in Hydrogen and Light Gaseous Hydrocarbons by Gas Chromatography

Hydrocarbon-Processing-Brochure

MN019_TOGA_Transformer-Oil-Gas-Analyzer-Reference-Manual_2019.2

MN021_GTA_Gas-Transformer-Analyzer-Reference-Manual_2019.2

SCION Nature GasAnalyzer_Brochure

SCION RefineryGasAnalyzer_Brochure

SCION-Instruments-Spares-and-Consumables-Brochure

Tham khảo link sản phẩm của công ty Việt Nguyễn độc quyền và đại diện phân phối tại đây:  https://vietnguyenco.vn/
Quý khách có nhu cầu tư vấn, vui lòng liên hệ:

CÔNG TY TNHH THƯƠNG MẠI – DỊCH VỤ – KỸ THUẬT  VIỆT NGUYỄN
Địa chỉ VPHCM: số N36, đường số 11, P. Tân Thới Nhất,  Q.12, Tp. Hồ Chí Minh

VPĐN: Số 10 Lỗ Giáng 5, phường Hòa Xuân, quận Cẩm Lệ, Tp. Đà Nẵng

VPHN: Tầng 1, toà nhà INTRACOM, 33 Cầu Diễn, P. Phúc Diễn, Q. Bắc Từ Liêm, Tp.Hà Nội

VP Cần Thơ: 275 Xuân Thủy, P. An Bình, Q. Ninh Kiều, Tp. Cần Thơ

Hotline 0817 663300 (Mr. Hiếu) – E: hieu@vietnguyenco.vn
Email info@vietnguyenco.vn
Website https://www.vietcalib.vnhttps://www.vietnguyenco.vn