| STT | Ứng dụng cho hệ sắc ký khí thiết kế theo yêu cầu |
| 1 | Analysis of hydrocarbons and permanent gases in balance gas |
| 2 | Analysis of impurities in Air and N2 |
| 3 | To analyze TFE impurities |
| 4 | To analyze mining gas |
| 5 | Trace Impurities in N2O |
| 6 | Methyl Iodide in Acetic Acid |
| 7 | Pure Medical Gas Analysis |
| 8 | Trace impurities BTEX in air |
| 9 | Refinery Gas Analysis with Full Inert Tubing |
| 10 | Analysis of H2, CO and C1-C6 hydrocarbons |
| 11 | Analysis of Trace impurities in Ethylene |
| 12 | Trace level analysis of single component in N2 |
| 13 | Analysis of Reactor Gas (H2, O2, N2, CO2, C2H4, C2H6, C3H6, C3H8) |
| 14 | Analysis of PGA and C1-C3 alcohols |
| 15 | Analysis of H2 and CO in CO2 |
| 16 | Analysis of CO and CO2 in Medical O2 |
| 17 | Analysis of Compressed Biogas |
| 18 | Analysis of Permanent Gas and Organic solvents in % and ppm level |
| 19 | Permanent Gas/Hydrogen analyzer full inert for Chlorine gas analysis |
| 20 | Samples with high Air or Methane content |
| 21 | Analysis of CO and CO2 in Air |
| 22 | Analysis of Greenhouse gas with sampling pump |
| 23 | Trace level analysis of permanent gases, C1-C6 Hydrocarbons, formaldehyde and formic acid |
| 24 | Measure low level Permanent gas and hydrocarbons in the gas from pilot system |
| 25 | Analysis of low level ethylene in air and CO/CO2/Methane |
| 26 | Analysis of CO2, C2H4, O2, CO and N2 |
| 27 | Measure components of natural gas and process gas |
| 28 | Analysis of permanent gas, light hydrocarbon and low level CO/CO2 in Refinery Gas |
| 29 | Analysis of Hydrogen and Oxygen content from fuel cells and lithium ion batteries |
| 30 | Analysis of trace level permanent gas |
| 31 | Analysis of trace sulfur and Nitrogen compounds |
| 32 | Analysis of Trace impurities in Helium |
| 33 | Natural Gas Analysis |
| 34 | Analysis of impurities in Hydrogen |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |